Application
Dust and anti-adhesion substances on the application surface should be cleaned.
A sufficient amount of water is poured into a clean container. FULLGIPS Satin Finishing Plaster is sieved to cover the water surface. It is waited for a few minutes, then the mortar is mixed until it reaches a homogeneous consistency. After mixing, the mortar is ready to use. The mortar in the container can be used for approximately 120 minutes.
Application is made with a steel trowel.
Suggestions
Do not mix FULLGIPS Satin Finishing Plaster with any other material.
If a mechanical mixer is to be used, it should be used at low speed.
Do not add water or plaster to your mortar after mixing.
The temperature of the application environment should be at least +5°C.
Storage Conditions
Maximum 20 bags should be stacked on top of each other.
It is recommended to be consumed within 1 year, provided that it is stored on a pallet in a dry, moisture-free and closed environment.
Poor storage conditions or exceeding the period of use may deteriorate the product's qualities.
