Application
A sufficient amount of water is poured into a clean container. FULLGIPS Cornice Plaster is sieved to cover the water surface. It is waited for a few minutes, then it is mixed until it reaches a homogeneous consistency to apply the mortar. After mixing, the mortar is ready to be poured into the molds. The mortar hardens in about 8-10 minutes.
Cornices made with FULLGIPS Cornice Plaster should be allowed to dry completely before assembly.
Suggestions
Do not mix FULLGIPS Cornice Plaster with any other product.
If you use a mechanical mixer, use it at low speed.
Do not add water or plaster to your mortar after mixing.
The temperature of the application environment should be at least +5°C.
Storage Conditions
It is recommended not to stack more than 20 bags on top of FULLGIPS Cornice Plaster.
It is recommended to consume FULLGIPS Drywall Plaster within 1 year, provided that it is stored on a pallet in a dry, moisture-free and closed environment.
Poor storage conditions or exceeding the usage period may deteriorate the qualities of FULLGIPS Bricklayer Plaster.
