Application
It is a gypsum-based surface smoothing plaster with high adhesion strength.
It can be applied on machined plaster plaster, perlite plaster plaster, black plaster, rough plastered surfaces and plaster plate.
The water of the mortar created from Fullgips Finish, which is produced with special additives, is less absorbed by the surface on which it is used.
It is easy to apply. It closes all kinds of cracks and defects on the surface and helps the surface to be ready for Fullgips Satin application.
By creating a smooth surface, FullgipsFinish also reduces the consumption of satin plaster to be applied to the surface.
It is a breathing material, balances the humidity and creates a healthy environment.
It has fire retardant properties due to the water it contains. It is an A1 class building material and is a non-combustible material.
It has a long working time, is applied easily and quickly.
Contributes to heat and sound insulation
Suggestions
Do not mix FULLGIPS Surface Smoothing Plaster with any other material.
If a mechanical mixer is to be used, it should be used at low speed.
Do not add water or plaster to your mortar after mixing.
The temperature of the application environment should be at least +5°C.
Storage Conditions
Maximum 20 bags should be stacked on top of each other.
It is recommended to be consumed within 1 year, provided that it is stored on a pallet in a dry, moisture-free and closed environment.
Poor storage conditions or exceeding the period of use may deteriorate the product's qualities.
